Finecrete

AAC Block Supplier in Jaipur

AAC Block Supplier in Jaipur: How to Compare AAC Block Price Per Piece Before You Order

Finding an AAC block supplier in Jaipur sounds simple until the quotes arrive. One gives a rate per piece. Another quotes per cubic metre. A third says “it depends on the size.” Picture Meena, a made-up name for a very real situation. She and her husband are building a three-storey home on the edge of Jaipur, and they have three quotes that don’t line up. Nobody has told them how to compare them.

This guide is for people in her position. We’ll explain what AAC blocks are, how to work out the real AAC block price per piece, how to choose a supplier, and how to lay and protect the walls once the blocks arrive. We’ll also cover granite, since most homes need both. At Finecrete, we’ve kept the language plain, so you can use it on your next site visit.

What is an AAC block, and what does AAC stand for?

The quick answer: AAC stands for autoclaved aerated concrete. An AAC block is a lightweight building block made from cement, lime, fly ash or sand, water and a little aluminium powder. The mix rises like dough, is cut into blocks and steam-cured in an autoclave. The air pockets make it light, easy to cut and good at slowing heat.

You’ll see the same thing called AAC bricks, AAC walls or autoclaved aerated concrete blocks. They’re all the same material. A related product, CLC (cellular lightweight concrete), is made with foam and cured without an autoclave, so the two aren’t identical.

How AAC blocks compare with red bricks and fly ash bricks

This is the question we hear most. Here’s the honest picture:

  • Weight. AAC is much lighter than red brick, so walls put less load on the structure and are easier to carry.
  • Size. One AAC block replaces several bricks, so walls go up faster with fewer joints.
  • Heat. The air pockets slow heat, which matters in Jaipur’s summers.
  • Finish. The surface is flat and even, so walls often need less plaster.
  • Cost. A block costs more per piece than a brick, but one block covers more wall. Savings on mortar, plaster, labour and structure can make the finished wall cheaper, though not in every case.

Fly ash bricks are a different product. They’re solid, heavier bricks made with fly ash, while AAC is aerated and autoclaved. Both are used in modern construction, but they behave differently on site.

AAC block price per piece: how to work it out

Here’s the trick that clears up most quote confusion. Many suppliers quote per cubic metre, others per piece. To compare them fairly, divide the cubic metre rate by the number of blocks in a cubic metre.

How many blocks fit in a cubic metre depends on the size. For the common 600 mm × 200 mm face:

Block thickness Approx. blocks per cubic metre
100 mm 83
150 mm 56
200 mm 42

Once you know the number of blocks in a cubic metre, the sum is easy. Divide the cubic metre rate on a quote by the number in the table, and you have the price of a single block. At the same cubic metre rate, a 100 mm block will always cost less per piece than a 200 mm block, simply because the bigger block holds more material.

So when you compare an AAC block price per piece from two sellers, check three things: the thickness, whether the price includes GST, and whether delivery to your site is included.

What changes the AAC block price?

The AAC block price you finally pay depends on more than the sticker rate:

  • block thickness and grade
  • order size, with larger orders often getting a better rate
  • distance from the plant, because freight and breakage add up
  • GST and loading or unloading charges
  • how well the blocks are packed for transport

A low gate rate from a plant far away can end up costing more than a slightly higher rate from a nearer one. Always ask for the landed price at your site.

How many AAC blocks do you need?

For a quick estimate, a 600 × 200 mm block covers about 0.12 square metres of wall. A 100 square foot wall (about 9.3 square metres) needs roughly 77 blocks, whatever the thickness. Add a little extra for cuts and breakage, then subtract the area of doors and windows.

Blocks aren’t the only quantity to plan. Adhesive is the other one, and our guide on AAC Block Adhesive Consumption shows how to calculate it. Getting AAC Block Adhesive Consumption right keeps you from running short in the middle of a course.

How to choose an AAC block supplier in Jaipur

A good AAC block supplier in Jaipur does more than sell you blocks. Ask these questions before you pay an advance:

  • Can I see test reports? Blocks in India are covered by IS 2185 (Part 3). Ask for recent strength and density results.
  • Are the blocks even in size and colour? Check edges and corners. Crumbly or chipped blocks mean trouble later.
  • Can I have a sample? Weigh it, cut it, feel it.
  • What is the landed price per piece? Include freight, GST and unloading.
  • How are blocks packed and delivered? Breakage in transit is a hidden cost.
  • Is adhesive and plaster support available? Blocks, adhesive and plaster should work as one system.

It also helps to know the difference between an organised dealer and a local shop. Organised sellers usually give written specifications, batch details and a warranty trail. Unorganised shops may be cheaper on day one, but you often have no paperwork to fall back on if something goes wrong. Neither is automatically better, so judge by what they can show you.

Before you start sourcing, have your wall plan ready: wall lengths and heights, thickness for each wall, door and window openings, and a rough delivery schedule. With that, any AAC block supplier in Jaipur can give you an accurate quote, and you can tell quickly who has done this before. If your site is closer to Delhi NCR, see our pages on an AAC Block Manufacturer in Gurugram and an AAC block manufacturer in Delhi. To check supply and delivery to your Jaipur site, tell the Finecrete team your location and quantity and they’ll confirm what’s possible.

Are AAC blocks strong enough for a house?

For most homes, yes, if they’re used the right way. A few questions come up again and again:

  • Are AAC blocks load bearing? In most multi-storey buildings, AAC is used as infill inside an RCC frame. Load-bearing use is possible in low-rise buildings, but it needs proper design by an engineer.
  • Can AAC blocks be used for exterior walls? Yes, with the right plaster and a good external finish.
  • Are AAC blocks good for earthquakes? They’re lighter than brick, which reduces the force on the structure. The building’s frame and design still matter most.
  • What about fire? AAC is non-combustible. Our page on Fire Resistant AAC Blocks explains how thickness affects fire performance.

How to install AAC blocks

The steps are simple, but the order matters:

  1. Level the base and lay the first course in cement mortar, so every course above sits true.
  2. Use thin-bed adhesive for the courses above, spread with a notched trowel. Don’t use thick sand-cement mortar for these joints.
  3. Stagger the joints, so vertical joints don’t line up from one course to the next.
  4. Cut blocks with a hand saw. Chase channels for pipes and wiring with a chaser, not a hammer.
  5. Let the wall settle, then plaster it with a mix meant for AAC.

The blocks themselves are already cured in the factory autoclave, so don’t soak them. Cure the plaster as the maker advises. For jointing and plaster, see our page on Masonry Mortar for AAC Blocks. People often ask if mortar and grout are the same. They’re not. Mortar bonds blocks and bricks together, while grout is a thinner, flowing mix used to fill gaps and cores. Using the right Masonry Mortar for AAC Blocks, or better still thin-bed adhesive, saves trouble later.

Protecting AAC walls from moisture

Construction & Protection

AAC absorbs water, so it needs protection, particularly if you live near the coast or in a heavy-rainfall zone. Jaipur is mostly dry, but the monsoon still brings real downpours. A few habits help:

  • Store blocks off the ground and under cover on site.
  • Use a damp-proof layer at the plinth.
  • Apply a suitable external plaster and a water-repellent paint.
  • Seal around windows and joints, and make sure rain doesn’t sit on ledges.
SUSTAINABLE CONSTRUCTION

Are AAC blocks a sustainable choice?

AAC is often called an eco-friendlier material. Many mixes use fly ash, which would otherwise be waste, and the lighter blocks cost less to transport. Better heat insulation can also lower cooling needs. “Sustainable” is a relative word, though, so ask your supplier what goes into their blocks instead of relying on the label.

GRANITE BUYING GUIDE

Choosing a granite supplier or granite slabs supplier

Most homes need stone as well as walls. If you’re choosing a granite supplier or a granite slabs supplier, apply the same careful approach you used for blocks:

  • Ask to see full slabs, not just small samples, and check for cracks or resin patches.
  • Request slabs from the same lot so colour and pattern match.
  • Confirm thickness, finish and how slabs are packed for transport.
  • Get the price per square foot in writing, with delivery.

For kitchens, darker and speckled granites tend to hide stains and everyday marks better than pale ones, though the best colour depends on your cabinets and lighting. In larger projects, granite is popular because it’s durable and available in big slabs, which means fewer joints. Our page on Granite Manufacturers in India is a good place to start, and Finecrete can also help you plan your granite alongside your blocks.


OUR COMMITMENT

Why you can trust this guide

Finecrete was founded in 2013–14 and, according to our website, serves more than 500 clients. We make AAC blocks, gypsum plaster and adhesive, and we’re ISO registered. We’ve tried to explain things plainly, and where an answer depends on your design or location we say so. This guide was last reviewed in November 2026. Prices, specifications and availability should always be confirmed in writing before you order.

Frequently Asked Questions

1. What is the AAC block price per piece?

It depends on the block size, order quantity, GST and delivery. To compare quotes, divide the per-cubic-metre rate by the number of blocks in a cubic metre, and ask for the landed price at your site.

2. Why does AAC block price differ between suppliers?

Thickness, grade, order size, distance from the plant, GST and packing all change the final AAC block price. Always compare the landed price, not just the gate rate.

3. How do I choose an AAC block supplier in Jaipur?

Ask for test reports against IS 2185 (Part 3), request a sample, compare landed prices and check how blocks are packed and delivered. Speak to a past customer if you can.

4. How many AAC blocks are in one cubic metre?

For a 600 × 200 mm block, about 83 blocks at 100 mm thickness, 56 at 150 mm and 42 at 200 mm.

5. How many AAC blocks do I need for 100 square feet?

About 77 blocks of 600 × 200 mm for a solid wall, plus extra for cuts and breakage.

6. Is an AAC block cheaper than a brick?

Per piece, a block costs more. Per wall, it can work out cheaper because it saves on mortar, plaster, labour and structure.

7. Do AAC blocks need curing or plastering?

The blocks are cured at the factory, so don’t soak them. They do need plaster for protection and finish, and the plaster should be cured as instructed.

8. Are AAC blocks load bearing, and can they be used outside?

Mostly used as infill within an RCC frame; load-bearing use is limited to low-rise and needs engineering design. They can be used for exterior walls with proper plaster and a water-repellent finish.

9. What is the difference between mortar and grout?

Mortar bonds blocks and bricks together. Grout is a thinner, flowing mix used to fill gaps, cores and tile joints. They’re not interchangeable.

10. How do I choose a granite supplier or granite slabs supplier?

See full slabs, ask for the same lot for colour match, check thickness and finish, and get the price per square foot in writing, including delivery.

Planning your wall package

Meena eventually asked each supplier for the landed price per piece, and the quote that had looked cheapest turned out to be the most expensive. If you’d like help working through yours, tell us your wall plan, block sizes and pour schedule, and we’ll go through it with you. Call Finecrete on +91 97299 90555, or visit finecrete.in to get started.

Leave a Comment

Your email address will not be published. Required fields are marked *

    Request A Call Back